At Life.Church, there is occasionally a need to copy and paste an IEM mix. For example, if the person who normally uses the BGV 2 mix has to move to BGV 3 for a day, this function will help that person start with a comfortable mix, even though they are using a different mix bus.
Turn "Recall Safe" OFF on all IEM mixes
The most important step to preparing for this is to ensure that recall safe is OFF on all IEM mixes. If recall safe is on, the mix will not be transferred from scene to scene.
Save a backup "bank" of IEM mixes
Before anything is moved, be sure to save a "bank of IEM mixes. Without a backup bank, the mix that we paste over will be overwritten, and lost. To save a backup, simply copy the most current scene(using the store and recall screen), and paste to an empty slot on the console. Rename the backup scene with something that makes the most sense to you. We suggest using something along the lines of "UTD(up to date) IEM SUNDAY".
Select CH JOB on the console screen
Select "COPY" in the bottom of the menu
Select the mix channel that needs to be copied/moved
On the QL5, navigate to the "Mix/Master" layer.
On the CL5, select the desired mix layer in the middle fader bank.
Press the SEL button above the mix that needs to be copied.
The console screen will reflect the selection by highlighting the choice in green like shown below.
Select the mix to paste over(Destination channel)
Press the SEL button above the destination channel
Verify that "WITH MIX SENDS" is highlighted
Press COPY on the console screen
After the use of this copied mix is over, paste the original mix back into place
Pull the original mix from the "backup bank" scene, and paste it back into place.
For steps on how to accomplish this, refer to the article: Transferring IEM mixes from scene to scene on a QL5/CL5