AVL Support Knowledge Base

Adjusting Headset Mic Placement

Updated on

Please take the time to read this article completely and then do us a favor. Forward it to someone at your campus, that uses the headset mic.  This article explains how to adjust the HSP-2 Mic that the Campus Pastors or Stage Time staff uses.  It does not pertain to the LifeKids headset microphone.

Attaching the microphone to the left or right side

Attaching the microphone to the left or right side

The neckband has as a clip which is designed so that the microphone boom can be worn on either side of the mouth.

To remove the microphone boom:

1. Open the clip on the neckband.

2. Carefully remove the microphone boom and the neckband from the clip.

3. Flip it over 180 degrees and set it back into the clip and close the clip.  

 

Adjusting the microphone boom and the neckband

For best possible comfort and optimum fit of the headset, the neckband and the microphone boom have to be adjusted to properly fit your head.

CAUTION! Damage to the microphone boom! DO NOT TRY AND ADJUST THE MICROPHONE BOOM!

The microphone boom can break or be impaired in its function when you bend or turn it in the wrong place.
  For adjusting the microphone boom, ONLY bend or turn the neckband.  DO NOT TRY AND ADJUST THE MICROPHONE BOOM!

Positioning the microphone towards the corner of the mouth

Positioning the microphone towards the corner of the mouth

** VERY IMPORTANT STEP **

To individually position the microphone:

  • Bend the neckband (#1) at the clip to adjust the angle of the microphone boom (#2).
  This will move it in or away from the face.
  • Push the microphone boom (#2) 
backwards or forwards in the clip so that the microphone is positioned at the corner of the mouth as shown.
  • Squeeze the ear hooks to raise or lower the microphone on the face.  

Adjusting the neckband

Adjusting the neckband

The neckband is flexible and ensures an optimum fit.

  • Change the length of the neckband until a snug but comfortable fit is achieved. 

  • If necessary, adjust the neck- band at the earhooks. 


Attaching the cable to the cable grip

Attaching the cable to the cable grip

Attach the microphone cable to the cable grip in the center of the neckband.

Note: When attaching the thin cable, make sure you also press the small cable sleeve into the cable grip or the cable will fall out.

PLEASE SEND THIS ARTICLE

These microphones are very expensive, using them properly and storing them carefully will really help prolong the life of the microphone.  We replace a lot of these microphones each year due to improper adjustments.  We need your help!

You can also find more articles like this at http://tech-support.life.church

Please call the Tech Team if you need any assistance.   x2846 or (405) 216-2846.

Previous Article Setting the Auditorium Clock to match the clock sent via Satellite
Next Article What order should our sermon backups be in?
Still Need Help? Contact Us